Document Download: R15-11: Release on the IAPWS Formulation 2011 for the Thermal Conductivity of Ordinary Water Substance

Last updated: 29 May 2018

Filename:

ThCond.pdf

Download now (pdf, 315 KB)

Description

This formulation is recommended for the calculation of the thermal conductivity of ordinary water in its fluid phases. 
The formulation consists of a dilute-gas term that is only a function of temperature, a finite-density term as a function of temperature and density, and a near-critical term as a function of temperature and density.
The region of validity the entire stable fluid region from the melting curve to 1173 K at pressures to 100 MPa, with lower maximum temperatures at higher pressures up to 1000 MPa; see the release document for details. It extrapolates in a physically reasonable way outside this region.
The development of the formulation and comparisons to available data are described in detail in a scientific article.

Online calculation

The Russian National Committee of IAPWS (through Moscow Power Engineering Institute) has provided online calculation pages, which may be useful in program development and verification. Note that IAPWS is not responsible for the content of these online calculation pages:

Revision History

  • This Release was adopted by IAPWS in 2011, replacing the previous Release of 1985 (which had most recently been revised in 2008).

This Release is the product of the Working Group "Thermophysical Properties of Water and Steam" (TPWS) of the International Association for the Properties of Water and Steam (IAPWS).